Resin bound driveways, patios and pavings are extremely hard wearing and durable, so assuming they're used as intended (standard pedestrian and vehicle traffic, not abnormal loads) they only require low maintenance. Some basic cleaning is important to keep them looking like new for even longer, but it's easy and doesn't require special equipment or harsh chemicals.
Top Tips
Top Tips For Resin Bound Driveway Maintenance
-
Brushing
Regular brushing with a stiff broom will remove rubbish, leaves, and weed seeds, and stop moss growth.
-
Pressure Washing
A sweep followed by a light pressure wash is normally all that is needed to keep a Resin Bound surface looking clean and fresh.
-
Oil and Fuel Spillages
Any vehicle leak can be unsightly – particularly on an otherwise pristine driveway. The quicker that you address the spillage, the easier it will be to remove stains and get your driveway back in good condition.
Start by washing off the oil or fuel with soapy water and then flush away any that remains with a light pressure wash.
Larger oil spills might require a degreasing agent, but it is important to test any chemicals on a small, tucked-away area before committing to use.WARNING – DO NOT USE BOILING WATER ON A RESIN SURFACE as it can dissolve the resin and create a hole in the surface.
-
Algae and Moss
Algae and moss usually only grow in shaded, damp areas. If your driveway, patio, or pathway benefits from sunshine all day, this will not be an issue. Plants or shrubbery could be cut back to let sunlight in and reduce any growth. In most cases, regular brushing and power washing will be sufficient to prevent any algae or moss. If your resin bound surface does experience any growth, a solution of bleach and a light power wash should be enough to get rid of it.
-
Tire Marks
Resin Bound driveways are at risk of showing tire marks, particularly if they are a quartz-based lighter colour. These marks usually occur if the wheels are turned when stationary or following a long drive where the tires are warm and heat from any friction reacts with the resin. A household liquid soap (the type used for washing dishes), followed by a light pressure wash should remove any marks.
-
Snow Removal
We recommend using a plastic snow shovel for snow removal, rather than a metal one that could damage the surface.
-
Ice Removal
The traditional methods of using salt or sand to prevent ice from becoming a hazard are not problematic on a Resin Bound surface. Once the cold weather has passed the surface should be cleaned by a light pressure wash.
-
Chewing Gum Removal
It is not advisable to use hard tools to scrape off the gum, as this could damage the surface. We recommend that you use a freezing spray, then pull off the gum very carefully.
-
Regular Jet Washing
We highly recommend cleaning periodically using a pressure washer. Ensure you don’t use excessive pressure – up to 150 bar is recommended – to avoid damage to the resin surface. Always keep the jet washer nozzle at least 20cm away from the surface.
Ensuring a Longer-Lasting Resin Bound Surface
-
Avoid placing heavy objects such as plant pots and skips on your resin bound driveway or patio.
-
Do not leave a vehicle in the same spot for a prolonged period, as it will create a shaded area where moss could grow.
-
Lightly pressure wash your Resin Bound surfaces regularly – maintenance is easier than dealing with a build-up of moss or algae later.
-
Always clean up any spills straight away, so that they cannot dry into and mark your surface.
Contact us for a free, no-obligation quotation. Resin Bound Surfaces Ltd is your premier resin installer for all driveway, patio and paving, and our expert team are always here to help.
REQUEST A QUOTE
Fill out the information below to get in contact with our office!
Read Our Privacy Policy
